Adding A Ups - NETGEAR RNDP6620-100NAS - ReadyNAS Pro RNDP6620 Business Edition Software Manual

ReadyNAS for Business RAIDiator 4.2.17

Adding a UPS

Adding an uninterruptible power supply (UPS) to the ReadyNAS is an easy way to protect
against power failures. Simply connect the ReadyNAS power cable to the UPS, and connect
the UPS USB monitoring cable back to the ReadyNAS. The UPS is detected automatically
and shows up on the status bar. Hover over the status light to display more detail.
You are notified by email whenever the UPS status changes; for example, when a power
failure forces the UPS into battery mode, or when the battery is low. When the battery is low,
the ReadyNAS automatically shuts down safely.
See also, Configuring UPS on page 114.
Optimization and Maintenance
110