NETGEAR RNDP6620-100NAS - ReadyNAS Pro RNDP6620 Business Edition Software Manual page 47

4. Click the Apply button.
A pop-up window displays advising you to reboot your unit.
5. Click the OK button.
The pop-up window closes.
6. Select System > Shutdown.
7. The Shutdown Options screen displays.
8. Select the Shutdown and reboot device radio button and click Apply.
Your unit begins to reboot. For more information about gracefully powering down your
unit, see System Shutdown and File System Check
After your unit restarts, a pop-up window displays advising you that the volume expansion
process is under way. Ensure that your unit is not interrupted during this process.
9. Click the OK button.
The pop-up window closes.
The RAID Configuration screen advises you of the volume expansion process's progress.
10. The volume expansion process can take several hours. If you set up email notifications
for your unit, you will receive an email message when the expansion process completes.
Reconfigure Volume C
If you want to reconfigure the default Flex-RAID Volume C, split it into multiple volumes,
specify a different RAID level, or specify a larger reserved space for snapshots, you need to
reconfigure your volume. The process involves these high level steps:
1. Delete the volume that you want to reconfigure.
2. Add a volume.
3. Specify RAID settings.
These steps are explained in more detail in the following sections.
ReadyNAS for Business RAIDiator 4.2.17
Managing Your ReadyNAS System
47
on page 118.