Restoring The Factory Default Settings - NETGEAR RNDP6620-100NAS - ReadyNAS Pro RNDP6620 Business Edition Software Manual

Restoring the Factory Default Settings

Use the Factory Default screen to reset the
ReadyNAS device back to its factory default
state.
Back up the data and configuration
information that you want to keep prior to
using this option. If you select this option,
you must confirm the command by typing:
FACTORY. You can also reset all settings to
their factory defaults using the Reset button
on the ReadyNAS chassis, according to the instructions in the ReadyNAS Hardware Manual.
WARNING!
Resetting to factory default erases everything, including data
shares, volumes, configuration information, and user and group
accounts. There is no way to recover after you confirm this
command.
ReadyNAS Default Configuration Settings
Table 4.
Feature
Login
User login URL when the ReadyNAS is
not connected to a DHCP server
Admin user name (case-sensitive)
Admin login password (case-sensitive)
Management
System configuration
Discovery, multi-unit status monitoring,
and RAID formatting utility
LAN Connections
MAC address
MTU size
Ports
LAN IP address
ReadyNAS for Business RAIDiator 4.2.17
Default
https://192.168.168.168
admin
netgear1
FrontView Web-based configuration and status monitoring
built in to the ReadyNAS RAIDiator firmware
RAIDar for Windows, Mac, and Linux available from
http://readynas.com
Default address
1500
Note: This setting is hardware-specific and will vary
depending on the ReadyNAS system.
DHCP acquired
Optimization and Maintenance
123