Cycle Options; Signal/Extend Tumble Plus; Anti-Bacterial; Delay Start/Damp Signal - GE Profile DPSB620 Owner's Manual

About cycle options.
NOTE:Not all features are available on all dryer models.
(Appearance and
features may vary)
SIGNAL
Alerts you that the cycle is c()mi)lete. The beeper will continue to sound every two
minutes for the next 6 minutes, until the clothes are removed. The clothes should
be removed when the beeper goes off so wrinkles won't set in.
Press SIGNAL
to select low, medium or high volume, or to turn the beeper off.
ge.com
TumblePlus
EXTEND TUMBLE PLUS
Minimizes wrinkles by adding approximately 60 minutes of no-heat tmnl)ling alter clothes
are dry, The beeper will sound every 5 minutes to remind you to remove the clothes,
The TIME REMAINING display will show 00.
ANTI-BACTERIAL
(on some models)
This option can only be used with the
COTTONS or MIXED LOADS cycles.
This option
reduces certain types of bacteria bv 99.9%, including: Staphylococcus aureus, P,seudomonas
aerug4nosa and Kh, bsiella pn_umoniae*. The anti-bacterial process occurs when high heat
is used during a portion of the d_Ting cycle.
NOTE: Do not use this cycle on delicate tabrics.
* The Anti-Bacterial Cycle is Certified by NSF International (formerly National Sanitation
Foundation) to NSF Protocol P154Sanitization Performance of Residential Clothes Dryers.
[ NSF Protocol P154
Sanitization Performance of
Residential Clothes Dryers
DELAY START (onsomemodels)
ILrse to delay the start oI your dryer.
1. Choose veto" dry cycle and any options.
2. Press DEL4YSTART. You can change the delay time in 30 minute increments using the
SET TIME arrow
pads.
3. Press the STARTpad to start the countdown.
The countdown time will be shown in the T/MEREMA/N/NG display,
NOTE:
If the door is opened while the dryer is in
DELAY,
t he countdown time will not
restart unless the door is closed and START has been pressed again.
DAMP SIGNAL
(on some models)
This option causes the dryer to beep when clothes have dried to a damp level. Remove
items that you wish to hang dry. The
DAMP SIGNAL
will only beep when the dryer
SIGNAL
is tin'ned on.
Removing clothes and hanging them when they are damp can reduce the need to iron
SOllle
itexns.
13