GE Profile DPSB620 Owner's Manual page 8

Quick Start Guide for Model DPSB650.
You can locate your model number on the label on the front of the dryer, behind the door.
Clean the lint filtex:
IMPORTANT" Clean the lint filter each
time you use the dryer.
Add clothes. Do not overload. This wastes
energ) and causes wrinkling.
@
0
Select one of the three drying methods:
• Press SENSOR CYCLES to dry according
to load type
• Press GARMENT CYCLES to dry
according to clothing type
• Press TIMED DRY to specit}' dry time
Select the dry cycle by pressing the
arrow pads ( GD ) at the sides of the
display. You can scroll up and down
through the list of cycles by pressing the
UP ( _ ) and DOWN ( V_)
arrow pads
beneath the display:
For TIMED DRY,you can rise either the
display or the SET TIME arrow pads to set
the drying time.
NOTE: Any time you make a selection that
is incompatible with the chosen dry cycle,
the dryer will beep twice.
Change any of the automatic settings,
if desired, by pressing the pad beneath
the setting.
• For best perli>rmance,
at!just
load size
to al_l_ropriate setting
• Dryness level detemfines how dry your
clothes will be at the end of the cycle
• At!just temperatm'e as recommended
on the fabric nlanufacturer's care label
f
NON SENSOR
€- Perfect Dry _N
DAMP LESS DSY MORE
DRY DRY
6 6
666
I IGH
MEDIUM
LOW
EXTRA
LOW
Close the door and press
START