Cycle Options - GE GFD40 Owner's Manual

Hide thumbs Also See for GFD40:
Table of Contents

Advertisement

About cycle options.
NOTE: Not all features are available on all dryer models.
Ext Tumble
e
Dry
Signal
24
Extended Tumble
Minimizes wrinkles by adding approximately
60 minutes of no-heat tumbling after clothes
are dry. The beeper will sound every two
minutes as a reminder to remove the clothes.
The ESTIMATED TIME REMAINING display will
show 0:00.
eDRY
Reduces the total energy consumption of specific dryercycles by
adjusting certain heat settings.
NOTE: Cycle times will change when e-Dry is selected. The eDry option will default to on
for Cottons. For optimal energy savings, turn eDry on. For optimal drying times, turn
eDry off. Energy savings will vary across loads and cycles.
This cycle can be used with Mixed Loads, Cottons, Delicates and Speed Dry. When the
eDry button is pressed, cycle settings change to reduce the total energy consumption
of the selected sensor cycle.
Signal
Alerts you that the cycle is complete.
The beeper will continue to sound every
minute for the next 5 minutes, until the
clothes have been removed. The clothes
should be removed when the beeper goes off
so wrinkles don't set in.
www.GEAppliances.ca
The extended tumble time does not get
added to the cycle time on the display
Press Signal to select low, medium or high
volume, or to turn the beeper off.

Advertisement

Table of Contents
loading

Table of Contents