Ricoh Aficio MP C3000 Scanner Reference page 132

Various Scan Settings
Note
❒ If [Batch] is selected, originals can be scanned using the ADF.
❒ When scanning originals using the exposure glass, depending on the set-
tings for [Wait Time for Next Orig.: Exposure Glass] under [Scanner Features], the
machine can wait for additional originals even if [Batch] is not selected in
[Original Feed Type]. For details about [Wait Time for Next Orig.: Exposure Glass],
see General Settings Guide.
❒ If, under [Scanner Features], [Set Wait Time] is set for [Wait Time for Next Orig.:
Exposure Glass] or [Wait Time for Next Original(s): SADF], place additional orig-
inals within the specified time. When the countdown ends, transmission or
storage starts automatically. To start transmission or storage before the
countdown is completed, press {q}. Countdown is canceled if Scan Set-
tings or other settings are changed in the meantime. Place additional orig-
inals, and then press {Start}. The machine scans the originals and the
countdown is resumed. For details about [Wait Time for Next Orig.: Exposure
Glass] and [Wait Time for Next Original(s): SADF], see General Settings Guide.
❒ If [SADF] is selected, scanning from the exposure glass is enabled after
scanning from the ADF. If this happens, you must press {Start} to start
scanning.
6
Reference
p.121 "Batch, SADF"
p.125 "Setting File Type"
124