Registering New Applications; To Register A New Application - Konica Minolta bizhub C654 User Manual

Using an application
4.9

Registering new applications

The multifunctional peripheral may not be programmed with applications, for
example, immediately after the multifunctional peripheral is registered with
the Setup Utility for RightFax. Start the Application Wizard, and then program
the multifunctional peripheral with new applications.
The Application Wizard can be started using either of the following methods.
- Click "Add" on the "Application" menu of the Application Registration
window.
- Click the [Add Application] on the right side of the Application Information
page.

To register a new application

The following procedure describes how to start the Application Wizard from
the "Application" menu and register an application.
1
Display the Application Registration window.
– For details on displaying the Application Registration window, refer
to "Reading an application" on page 4-2.
Setup Utility for RightFax
4
4-25