Konica Minolta bizhub C650 User Manual page 43

Troubleshooting
Condition
The Add New Hardware
Wizard starts when this
device is connected to the
computer.
If the problem is not corrected after the described operation is performed,
contact your technical representative.
AU-101
Possible cause
Is this device connected
to the same USB port
used when the driver was
installed?
Remedy
If this device is connected
to a USB port different
from the one used when
the driver was installed,
the Add New Hardware
Wizard may start. Use the
same USB port used
when the driver was
installed.
6
42