[2]
4
Drum unit/K, Ozone filter, Toner filter replacement instructions
[2]
[1]
[3]
[4]
A0P0F2C527DA
[2]
[1]
A0P0F2C529DA
5. Secure the drum unit/K [1] to the
developing unit/K with the two levers
[2].
NOTE
• Push the front and back levers in
the direction of the arrow at a time
to secure the drum unit/K.
• Make sure the drum unit/K is
securely fixed with two levers.
• Check that the front lever [3] of the
drum unit/K is parallel to the verti-
cal line marked on the label [4] on
the developing unit/K.
6. Insert the imaging unit/K [1] into the
machine, and tighten the shoulder
screw [2] to secure the drum unit/K.