Konica Minolta bizhub C452 Function Manual page 24

3.1 General copy operation
5
Press the [Start] key.
The original is scanned and the data is copied.
% To temporarily stop the copy operation, press the [Stop] key.
% If "Ready to accept another job." appears while printing a job,
you can scan the next original.
Reference
- Some settings cannot be combined with each other. If they are combined improperly, the settings will
be given priorities in either of the two ways described below.
– The setting configured last is given priority. (The setting configured first is canceled.)
– The setting configured first is given priority. (A warning message appears.)
- In User Settings, you can select to display [Next Copy Job]. For details, refer to the "User's Guide [Copy
Operations]".
- If an original with copy guard patterns embedded is scanned, the copy operation is stopped and the
job is discarded.
- If an original with a password embedded by the password copy function is scanned, the copy operation
starts after you enter the password.
- If multiple originals with different passwords are scanned at the same time, you will need to enter a
password for each original.
bizhub C652/C652DS/C552/C552DS/C452
3
3-3