Installing The Fax Driver Using Plug And Play; For Windows 2000; For Windows Xp/Server 2003 - Konica Minolta bizhub C451 User Manual

Installing the fax driver
14
When installation is complete, make sure that the icon of the installed printer appears in the Printers
window.
15
Remove the CD-ROM from the CD-ROM drive.
This completes the fax driver installation.

Installing the fax driver using Plug and Play

For Windows 2000

1
After using a USB cable to connect this machine to a computer, turn on the computer.
– Do not disconnect or connect the cable while the computer is starting up.
2
Insert the printer driver CD-ROM into the computer's CD-ROM drive.
3
Turn the main power of this machine on.
The Found New Hardware Wizard starts up.
4
Select "Search for a suitable driver for my device (recommended)", and then click the [Next] button.
5
Select "Specify location", and then click the [Next] button.
6
Specify the desired folder on the CD-ROM that contains the fax driver, and then click the [OK] button.
– Select the specified folder according to the printer driver to be used, the operating system, and the
language.
7
Click the [OK] button, and then follow the on-screen instructions.
8
Click the [Finish] button.
9
When installation is complete, make sure that the icon of the installed printer appears in the Printers
window.
10
Remove the CD-ROM from the CD-ROM drive.
This completes the fax driver installation.

For Windows XP/Server 2003

1
After using a USB cable to connect this machine to a computer, turn the computer on.
– Do not disconnect or connect the cable while the computer is starting up.
2
Insert the printer driver CD-ROM into the computer's CD-ROM drive.
3
Turn the main power of this machine on.
– If the Add New Hardware Wizard does not start up, turn the main power off, then on again.
– When turning the power off, then on again, wait at least 10 seconds before turning the power on
again; otherwise, this machine may not function properly.
The Found New Hardware Wizard dialog box appears.
4
Select "Install from a list or specific location (Advanced)", and then click the [Next] button.
– If the Windows connect to Windows Update dialog box appears, select "NO".
5
From "Search for the best driver in these locations", select "Include this location in the search", and
then click the [Browse] button.
6
Specify the desired folder on the CD-ROM that contains the fax driver, and then click the [OK] button.
– Select the specified folder according to the printer driver to be used, the operating system, and the
language.
7
Click the [Next] button, and then follow the on-screen instructions.
– When the Digital Signature dialog box appears, click the [Continue] button.
Fax Driver
2
2-8