Onboard Devices Configuration - Asus P7P55D PREMIUM User Manual

3.6.3

Onboard Devices Configuration

Onboard Devices Configuration
HDA Controller
Front Panel Type
Realtek LAN1
LAN Boot ROM
Realtek LAN2
LAN Boot ROM
Onboard 1394 Controller
J-Micron PATA Controller
Serial Port1 Address
Marvell 9123 Controller
HDA Controller [Enabled]
[Enabled]
[Disabled]
Front Panel Type [HD Audio]
[AC97]
[HD Audio] Set the front panel audio connector (AAFP) mode to high-definition audio.
Realtek LAN1/2 [Enabled]
[Enabled]
[Disabled]
LAN Boot ROM [Disabled]
This item appears only when you enable the previous item(s).
[Disabled] Disables Realtek LAN Boot ROM.
[Enabled]
Onboard 1394 Controller [Enabled]
[Enabled]
[Disabled]
J-Micron PATA Controller [Enabled]
[Disabled]
[Enabled]
Serial Port1 Address [3F8/IRQ4]
Allows you to select the Serial Port1 base address.
Configuration options: [Disabled] [3F8/IRQ4] [2F8/IRQ3] [3E8/IRQ4] [2E8/IRQ3]
Marvell 9123 Controller [IDE Mode]
[Disabled]
[IDE Mode]
[AHCI Mode]
3-22
BIOS SETUP UTILITY
Advanced
[Enabled]
[HD Audio]
[Enabled]
[Disabled]
[Enabled]
[Disabled]
[Enabled]
[Enabled]
[3F8/IRQ4]
[IDE Mode]
Enables the High Definition Audio Controller.
Disables the controller.
Set the front panel audio connector (AAFP) mode to legacy AC'97
Enables Realtek LAN Controller 1/2.
Disables Realtek LAN Controller 1/2.
Enables Realtek LAN Boot ROM.
Enables the onboard 1394 Controller.
Disables the controller.
Disables the J-Micron controller.
Enables the J-Micron controller.
Disables the Marvell controller.
Set to [IDE Mode] when you want to use the Serial ATA hard disk drives as
Parallel ATA physical storage devices.
Set to [AHCI] when you want the SATA hard disk drives to use the AHCI
(Advabced Host Controller Interface). The AHCI allows the onboard storage
driver to enable advanced Serial ATA features that increases storage
performance on random workloads by allowing the drive to internally
optimize the order of commands.
Options
Enabled
Disabled
Chapter 3: BIOS setup