Optional Brick Liner Installation Instructions - Empire Comfort Systems VF24FP2-1 Installation Instructions And Owner's Manual

OPTIONAL BRICK LINER INSTALLATION INSTRUCTIONS

INSTALLING OPTIONAL BRICK LINER EHL-24-1.
1. Remove screen assembly from fireplace.
2. Remove logs from burner assembly.
3. Insert rear brick liner and (2) side brick liners onto bottom
of the inner casing. Align grout lines on rear brick liner with
grout lines on side brick liners. You must insert rear brick
liner before inserting the (2) side brick liners.
4. Loosen top and bottom 10 x 1/2" screws from each side of
firebox.
5. Place the (2) liner mounting brackets over the front edges of
the (2) side brick liners. Attach liner mounting brackets to
outer casing with (4) four 10 x 1/2" screws from Step 4.
6. Replace logs into burner assembly. Refer to "Log Placement,"
Page 12.
7. Attach screen assembly to fireplace.
8. Installation of optional brick liner is completed.
20248-2-0806
EHL-24-1 for Unvented Gas Fireplace
Model
VF24FP2-1, VF24FP3-1
Part Number
11504
R-5769
R-5770
R-5771
PARTS LIST FOR EHL-24-1, BRICK LINER KIT
Description
Liner Mounting Bracket - Front, 2 Required
Brick Liner - Rear
Brick Liner - Side Left
Brick Liner - Side Right
Page 21