Onboard Devices Configuration; Usb Configuration - Asus P5QL-EM - Motherboard - Micro ATX User Manual

South Bridge Configuration
Audio.Controller.[Enabled]
Allows you to set the audio controller. Configuration options: [Enabled] [Disabled]
Front Panel Support Type [HD Audio]
Allows you to select the front panel support type. If High Definition Audio Front Panel
used, please set HD Audio mode. Configuration options: [AC97] [HD Audio]
SPDIF_OUT Mode Setting [SPDIF Output]
Allows you to select SPDIF_OUT mode setting. Configuration options: [HDMI Output]
[SPDIF Output]
2.4.4

Onboard Devices Configuration

Onboard.LAN.[Enabled]
Allows you to enable or disable the onboard LAN controller.
Configuration options: [Enabled] [Disabled]
LAN Option ROM [Disabled]
Allows you to enable or disable the LAN option ROM in the onboard LAN controller.
This item appears only when the Onboard LAN item is set to Enabled. Configuration
options: [Disabled] [Enabled]
Marvell.IDE.controller.[Enabled]
Allows you to enable or disable Marvell IDE controller.
Configuration options: [Enabled] [Disabled]
1394.controller.[Enabled]
Allows you to enable or disable 1394 controller.
Configuration options: [Enabled] [Disabled]
Serial.Port1.Address.[3F8/IRQ4]
Allows you to select the Serial Port1 base address.
Configuration options: [Disabled] [3F8/IRQ4] [2F8/IRQ3] [3E8/IRQ4] [2E8/IRQ3]
Parallel.Port.Address.[378]
Allows you to select the Parallel Port base addresses.
Configuration options: [Disabled] [378] [278] [3BC]
Parallel.Port.Mode.[ECP]
Allows you to select the Parallel Port mode.
Configuration options: [Normal] [Bi-Directional] [EPP] [ECP]
ECP Mode DMA Channel [DMA3]
Appears only when the Parallel Port Mode is set to [ECP]. This item allows you to set
the Parallel Port ECP DMA. Configuration options: [DMA0] [DMA1] [DMA3]
Parallel Port IRQ [IRQ7]
Allows you to select parallel port IRQ. Configuration options: [IRQ5] [IRQ7]
2.4.5

USB Configuration

The items in this menu allows you to change the USB-related features. Select an item then
press <Enter> to display the configuration options.
The Module Version and USB Devices Enabled items show the
auto-detected values. If no USB device is detected, the item shows None.
2-16 Chapter 2: BIOS setup