Installing A Dimm; Removing A Dimm - Asus P5QL-EM - Motherboard - Micro ATX User Manual

1.7.3. Installing.a.DIMM
Unplug the power supply before adding or removing DIMMs or other system components.
Failure to do so can cause severe damage to both the motherboard and the components.
1. Unlock a DDR2 DIMM
socket by pressing
the retaining clips
outward.
2. Align a DIMM on the
socket such that the
notch on the DIMM
matches the break on
A DDR2 DIMM is keyed with a notch so that it fits in only one direction. DO NOT force a
DIMM into a socket to avoid damaging the DIMM.
3. Firmly insert the DIMM into the socket
until the retaining clips snap back in place
and the DIMM is properly seated.
1.7.4. Removing.a.DIMM
To remove a DIMM:
1. Simultaneously press the retaining clips
outward to unlock the DIMM.
Support the DIMM lightly with your
fingers when pressing the retaining
clips. The DIMM might get damaged
when it flips out with extra force.
2. Remove the DIMM from the socket.
1-16
1
Unlocked.retaining.clip
Locked.Retaining.Clip
1
2
DDR2.DIMM.notch
3
2
DDR2.DIMM.notch
Chapter 1: Product introduction
1