Connecting The Serial Ata Cable - Intel D848PMB Product Manual

Intel Desktop Board D848PMB Product Guide

Connecting the Serial ATA Cable

The SATA cable (4-conductor) supports the Serial ATA protocol and connects a single drive to the
desktop board. Either end of the cable can be connected to the SATA drive or the connector on the
board (see Figure 10).
For correct cable function:
1. Observe the precaution in "Before You Begin" on page 23.
2. Attach either cable end to the connector (A) on the board.
3. Attach either cable end to the connector (B) on the drive.
A
34
Figure 10. Connecting the Serial ATA Cable
B
OM16376