Connecting The Serial Ata (Sata) Cable; Connecting The Serial Ata Cable - Intel DG965OT - Desktop Board Motherboard Product Manual

Installing and Replacing Desktop Board Components

Connecting the Serial ATA (SATA) Cable

The SATA cable supports the Serial ATA protocol and connects a single drive to the
desktop board. For correct cable function:
1. Observe the precaution in "Before You Begin" on page 25.
2. Attach the locking cable end to the connector on the board (Figure 21, A).
3. Attach the cable end without the lock to the drive (Figure 21, B).
Figure 21. Connecting the Serial ATA Cable
41