Setting the BIOS Configuration Jumper Block
Figure 13 shows the location of the BIOS configuration jumper block.
Figure 13. Location of the BIOS Configuration Jumper Block
The three-pin BIOS jumper block enables all board configurations to be done in BIOS Setup.
Table 9 shows the jumper settings for the Setup program modes.
Table 9.
Jumper Settings for the BIOS Setup Program Modes (J9H2)
Jumper Setting
3
1
3
1
3
1
1
3
J9H2
Mode
Description
Normal (default)
The BIOS uses the current configuration and passwords for booting.
(1-2)
Configure
After the Power-On Self-Test (POST) runs, the BIOS displays the
(2-3)
Maintenance Menu. Use this menu to clear passwords.
Recovery
Recovers BIOS from a diskette in the event of a failed BIOS update.
(None)
Installing and Replacing Desktop Board Components
OM16296
39