Setting The Bios Configuration Jumper Block; Location Of The Bios Configuration Jumper Block; Jumper Settings For The Bios Setup Program Modes - Intel D915GLVG Product Manual

Setting the BIOS Configuration Jumper Block

CAUTION
Always turn off the power and unplug the power cord from the computer before changing the
jumper. Moving the jumper with the power on may result in unreliable computer operation.
Figure 24 shows the location of the desktop board's BIOS configuration jumper.
Figure 24. Location of the BIOS Configuration Jumper Block
The three-pin BIOS jumper block enables all board configurations to be done in BIOS Setup.
Table 8 shows the jumper settings for the Setup program modes.
Table 8.

Jumper Settings for the BIOS Setup Program Modes

Jumper Setting
1 3
Mode
Normal (default) (1-2)
Configure (2-3)
Recovery (None)
Installing and Replacing Desktop Board Components
Description
The BIOS uses the current configuration and passwords for
booting.
After the Power-On Self-Test (POST) runs, the BIOS
displays the Maintenance Menu. Use this menu to clear
passwords.
The BIOS recovers data from a recovery diskette in the
event of a failed BIOS update.
OM17375
45