Multi-Purpose Tray Pick Rollers - Tektronix Z780N - Phaser 780 Color Laser Printer Reference Manual

Multi-purpose tray pick rollers

Note
Replace the pick rollers as a set.
1. Remove the multi-purpose tray top cover.
2.
Release the latch holding the front pick roller core to the pick up shaft
and slide the core away from the front pick roller.
3. Slide the front pick roller toward the front roller core, so the pick up roll
clears the locking pin. Remove the front pick roller.
4. Release the latch holding the rear roller core to the pick roller shaft and
slide the roller away from the rear pick roller.
5.
Slide the rear pick up roller toward the rear roller core, so the pick roller
clears the locking pin. Remove the rear pick roller.
Service Guide
95