Fuser assembly
1.
Turn off the printer and open the top media tray.
2.
Remove the screw securing the fuser assembly to the printer frame.
3.
Slide the fuser assembly a few inches out of the printer.
4.
Lift the end of the fuser assembly and pull the assembly out of the
printer.
To install the fuser assembly in the printer, lift the end of the fuser assembly as
you insert the assembly side rails into the guide wheels inside the printer. Lower
the end of the fuser assembly and slide the assembly into the printer. Reinstall the
screw to secure the fuser assembly to the printer frame.
Fuser assembly
Removing the fuser assembly
Rear screw
Tray 1
Service Guide
Front
screw
780-18-01
125