Rear Cover Removal - Lexmark E450DN - E 450dn B/W Laser Printer Service Manual
Service manual
Hide thumbs
Also See for E450DN - E 450dn B/W Laser Printer:
- User manual (70 pages) ,
- Printing manual (17 pages) ,
- Setup & installation (2 pages)
Table of Contents
Advertisement
4512-630
Rear cover removal
1.
Remove the right side cover. See
2.
Remove the left side cover. See
3.
Remove the two screws (A).
4.
Open the rear cover.
5.
Lift the rear cover, unhooking it from the frame at the bottom, and remove.
Note: In re-installation, check to make sure that the fuser ground cable is routed out of the way and is not
pinched or damaged.
4-6
Lexmark™ E450dn
"Right side cover removal" on page
"Left side cover removal" on page
3-5.
3-4.
Advertisement
Table of Contents
