Lexmark E450DN - E 450dn B/W Laser Printer Service Manual page 63

3.
Use or to select the margin setting you need to change, and press
The Top margin sign/value pair blinks. This indicates it is the margin value being changed.
T=xxx*
L=xxx*
4.
Use to decrease or
The message Submitting selection displays, and the original REGISTRATION screen appears with
the beside the previously selected margin setting.
The print registration range is:
Variable Description
B= Bottom margin
T= Top margin
L= Left margin
R= Right margin
5.
Continue changing the settings by repeating steps 2 through 4.
6.
Print another copy of the Quick Test to verify your changes.
7.
To exit REGISTRATION, press Back (
B=xxx*
R=xxx*
to increase the offset values, and press
Value
-20 to +20 Each increment causes
approximately 0.55 mm shift in the
bottom margin.
-25 to +25 Each increment causes
approximately 4 pels shift (at 600
dpi).
-25 to +25
-10 to +10
)
.
.
to confirm the value.
Direction of change
A positive change compresses the
image so it appears to move down
the page and a negative change
moves the image up.
A positive change moves the image
down the page and increases the
top margin. A negative change
moves the image up and decreases
the top margin.
A positive change moves the image
to the right, and a negative change
moves the image to the left. No
compression occurs.
A positive change moves the image
to the right, and a negative change
moves the image to the left.
Diagnostic aids
4512-630
3-5