Auto Comp Clutch Removal - Lexmark E450DN - E 450dn B/W Laser Printer Service Manual

4512-630
6.
Rotate the arm, and pull to remove the auto comp.

Auto comp clutch removal

1.
Remove the left side cover. See
2.
Remove the main motor drive. See
3.
Remove the screws (A).
Note: Resistance to loosening the screw may have to be applied to the shaft. Use a finger or small screwdriver
against the coupler behind the clutch.
4.
Remove the auto comp clutch.
4-10
Lexmark™ E450dn
"Left side cover removal" on page
"Main motor drive removal" on page
A
3-4.
3-28.