Installing The Filter - EdgeStar AP10002BL Owner's Manual

Hide thumbs Also See for AP10002BL:
Table of Contents

Advertisement

Installing the Filter

Your portable air conditioner ships with a pre-filter. It is
recommended you replace the filter every two to three months, or
as needed. It is necessary to clean the pre-filter periodically. Follow
the steps below to install the carbon filter:
1. Shut off the unit if it is on. In the rear of the unit pull the air filter
grill from the side.
2. Place the carbon filter between the grille and the pre-filter.
3. Close the grille.
Edgestar Portable Air Conditioner
10

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents