Changing Display Type (Disp Type); Changing Background (Background); Changing Spectrum Analyzer (S/A) - Eclipse CD7200 MKII Owner's Manual

Changing display type
(DISP Type)
You can change the display type (Background or
Spectrum analyzer).
Press the [SELECT] (Up/Down)
1
button to select DISP Type.
2
Press the [ENTER] button.
The display type setting mode is
activated.
Press the [SELECT] (Up/Down)
3
button to select a setting item.
When the button is pressed, the
setting item changes in the following
order.
Background ↔ S/A ↔ Background ↔
4
Press the [ENTER] button.
Switches among
modes.
Changing Background
(Background)
Press the [SELECT] (Up/Down)
1
button to select Background.
2
Press the [ENTER] button.
The background setting mode is
activated.
Press the [SELECT] (Up/Down)
3
button to select a setting item.
When the button is pressed, the
background changes in the following
order.
Motion picture1 ↔ Motion picture2 ↔
Motion picture1 ↔
Making changes with Display Adjustment Mode
the adjustments
4
Press the [ENTER] button.
The selected settings will take effect.
Changing spectrum analyzer
(S/A)
You can change the spectrum analyzer type.
Press the [SELECT] (Up/Down)
1
button to select S/A (Sensitivity).
2
Press the [ENTER] button.
The spectrum analyzer type setting
mode is activated.
Press the [SELECT] (Up/Down)
3
button to select a setting item.
When the button is pressed, the
analyzer type changes in the following
order.
Type 1 ↔ Type 2
4
Press the [ENTER] button.
The selected settings will take effect.
XIII
81