Figure 8-4. System Meters Screen - Eaton POWERWARE 9315 Installation And Operation Manual

8.5.1 System Meters Screen
Figure 8-4 shows the LCD screen as it appears when you first start the UPS. The
Meters menu is displayed in the menu box, with the System option highlighted. In the
information area, the system meters show their current readings.
System Normal
ALARM:
NOTICES: NONE
Battery
Minutes
48.5
Meters
System
Load Amps
Versions
Meters
The Input area shows the phase-to-phase voltage, frequency, and phase current
of the incoming utility, followed by the kVA, kW, and power factor measurements.
The output area shows the same information for the power being output by the UPS.
The Bypass area shows the phase-to-phase voltage of the bypass source. The Battery
area displays the DC voltage (V) and the DC current (I).
®
EATON Powerware 9315 UPS (500–750 kVA) Installation and Operation Manual
Uninterruptible Power System
NONE
VAB VBC
nnn nnn
IA
nnn
KVA
nnn
Bypass
VAB
nnn
Events Statistics Graphics Setup

Figure 8-4. System Meters Screen

Input
VAB
VCA FREQ
nnn nn.n nnn
IB IC IA
nnn nnn nnn
KW PF
nnn 0.nn
VBC VCA
nnn nnn
S
164201691 Rev 1 www.powerware.com
USING THE CONTROL PANEL
4 MAY 1999 09:25:42
Output
VBC VCA
FREQ
nnn nnn nn.n
IB IC IN
nnn nnn nnn
KVA KW PF
nnn nnn 0.nn
Battery
V I
nnn + nn
8-5