Rear Panel; Speaker Outputs Right/Left; Power - Dynacord PowerMate 1000 Owner's Manual

R E A R P A N E L
SPEAKER OUTPUTS RIGHT / LEFT
The PowerMate is equipped with professional SPEAKON
connectors, offering an electrical and mechanical secure con-
nection which complies to all security regulations. It also allows
the use of high quality speaker cables with a diameter of 4 x
2
2.5mm . The DYNACORD accessory assortment includes all
recommended cables and connectors.
WARNING:
The speaker output terminals are marked with a
symbol "
", which signifies that these terminals
present a shock hazard to the user.
Make connections to these terminals as described in the
owner's manual.

POWER

mains switch to turn the PowerMate on or off.
The PowerMate is operational when the POWER ON indicator
is lit and the power outputs are activated.
Please make sure to set the master faders to their minimal
position or engage the STANDBY switch before turning
the power on. This will save you, your audience, and the
equipment from unnecessary stress.
In case additional external equipment is connected to the
PowerMate – e. g. FX units, power amplifiers, EQs, etc. –
please, proceed in the following order when switching
your equipment on:
1.FX units
2.PowerMate
3.external power amplifiers
When switching the power off, please proceed in the
opposite order.
49