I Would Like To Switch A Part Of The Live Image (Pan); I Would Like To Play The Slides (Slide Show) - Dukane DVP507 User Manual

8.13.3. Playing image
1. Press [SOURCE] on the remote control or control panel to
display thumbnails of all video recorded.
2. Press [] or [] or [] or [] to select the thumbnail you want to
view.
3. Press [ENTER] for full-screen play.
4. Press [] or [] to turn to the previous/next video.
5. Press [SOURCE] to exit.
<Note> Only the MOV files recorded can be played but sound
output is not available from the DVP507; an additional
amplifier plus speakers can be connected to the audio out port.
There is no speaker in the DVP507.
I would like to switch a part of the live image
8.14
(PAN)
1. Press [PAN] on the remote control or control panel to switch the live
image to the upper-left / lower-left / upper-right / lower-right / full
screen.

I would like to play the slides (Slide Show)

8.15
8.15.1 Setting the slide show effect:
1. Press [MENU] on the remote control or control panel to enter the
setting menu.
2. Press [] or [] to the [Storage] menu.
3. Press [] to find the [Slide Show Effect].
4. Press [] or [] to select image switch mode between [Off / Shutter /
Right / Down / Side / Open].
5. Press [MENU] to exit.
8.15.2 Setting delay time for the slide show
1. Press [MENU] on the remote control or control panel to enter the
setting menu.
2. Press [] or [] to the [Storage] menu.
3. Press [] to find [Delay].
4. Press [] or [] to select image switch mode between [1 Sec / 3 Sec /
5 Sec / 10 Sec / Manual].
5. Press [MENU] to exit.
DUKANE AV DIVISION
27