Receiving Faxes - Epson WorkForce WF-3530 Quick Manual

4. Press x
Color
press y
Cancel
■
If the recipient's fax machine prints only in black and white, your fax is
automatically sent in black and white even if you press x
■
You can select
2-sided.
■
If you are scanning with the ADF (see page 6), your document is automatically
scanned and faxed.
■
If you placed your document on the scanner glass, you can scan additional pages
after the first one is sent.
■
If the fax number is busy, you see a redialing message and the product redials
after one minute. To redial immediately, press
Note: If you turn off the product, the following data stored in the product's temporary
memory will be lost: received faxes that haven't yet been printed, faxes scheduled to
be sent later, and faxes being retransmitted automatically.

Receiving Faxes

Before receiving faxes, make sure you load plain paper and select the correct settings for the
paper you've loaded.
1. Press , if necessary, then press l or r, select
2. Press d and select
3. Select
Receive Settings
4. To receive faxes automatically, select
5. Select the
Paper Size
Note: If the incoming fax is larger than the paper you loaded, it is reduced to fit or
printed on multiple pages, depending on the
If you run out of paper during printing, you see an error message. Load more paper and
press one of the x buttons to continue.
Note: To change the number of rings before the product answers, see page 18. To
manually receive a fax, see your online User's Guide.
or to begin scanning and faxing your document. (To cancel,
B&W
.)
2-Sided Faxing
.
Fax Settings
.
and
Paper Source
even if the recipient's fax machine does not print
Redial/Pause
, then press
Setup
, then select
Auto Answer
you want to use for printing faxes.
Auto Reduction
.
Color
.
.
OK
.
On
setting you select.
Receiving Faxes
19