ZyXEL Communications P-2301R/RL-P1C Support Notes page 73

Address
Enter the SIP server's listening port for SIP in this field. Leave this field set
SIP Server
Port to the default if your VoIP service provider did not give you a local port
number for SIP.
A SIP register server maintains a database of SIP identity-to-IP address
REGISTER
(or domain name) mapping. The register server checks your user name
Server
and password when you register.
Address
Enter the SIP register server's address in this field.
If you were not given a register server address, then enter the
address from the SIP Server Address field again here.
Enter the SIP register server's listening port for SIP in this field.
REGISTER
Server Port
If you were not given a register server port, then enter the port from
the SIP Server Port field again here.
A SIP service domain is the domain name that comes after the @ symbol
SIP Service
in a full SIP URI.
Domain
Enter the SIP service domain name in this field.You can use up to 127
ASCII Extended set characters.
This is the user name for registering this SIP account with the SIP register
Authentication
server. Type the user name exactly as it was given to you. Use ASCII
User ID
characters.
Authentication Type the password associated with the user name above. Use ASCII
Password Extended set characters.
Select this check box to not show identification information when you make
Block Caller
VoIP calls. Clear this check box to show identification information when
ID
you make VoIP calls.
Apply to Phone 1 and Phone 2 correspond to the ZyXEL device's physical PHONE
1 and 2 ports, respectively. Select whether you want to receive calls for
this SIP account on Phone 1, Phone 2 or both. If you select both, you will
not know which SIP account a call is coming in on.
All contents Copyright (c) 2007 ZyXEL Communications Corporation.
Prestige 2301R/RL-P1C Support Notes
73