ZyXEL Communications P-2301R/RL-P1C Support Notes page 55

DHCP Server Address= N/A
Press ENTER to Confirm or ESC to Cancel:
Key Settings:
If the ZyXEL device's DHCP server is enabled, the IP pool for the clients can be any of
DHCP Setup
the three networks.
Enter the first LAN IP address for the ZyXEL device. This will create the first route in
TCP/IP Setup
the enif0 interface.
Edit IP Alias Toggle to 'Yes' to enter menu 3.2.1 for setting up the second and third networks.
2. Edit the second and third networks in menu 3.2.1 by configuring the ZyXEL device's second and third LAN
IP addresses.
IP Alias 1=
IP Alias 2=
Key Settings:
Menu 3.2.1 - IP Alias Setup
Yes
IP Address= 192.168.2.1
IP Subnet Mask= 255.255.255.0
RIP Direction= None
Version= RIP-1
Incoming protocol filters=
Outgoing protocol filters=
Yes
IP Address= 192.168.3.1
IP Subnet Mask= 255.255.255.0
RIP Direction= None
Version= RIP-1
Incoming protocol filters=
Outgoing protocol filters=
Enter here to CONFIRM or ESC to CANCEL:
All contents Copyright (c) 2007 ZyXEL Communications Corporation.
Prestige 2301R/RL-P1C Support Notes
55