ZyXEL Communications P-2301R/RL-P1C Support Notes page 56

Toggle to 'Yes' and enter the second LAN IP address for the ZyXEL device. This will
IP Alias 1
create the second route in the enif0:0 interface.
Toggle to 'Yes' and enter the third LAN IP address for the ZyXEL device. This will
IP Alias 2
create the third route in the enif0:1 interface.
•
Time Service in Prestige
There is no RTC (Real-Time Clock) chip so the ZyXEL device should launch a mechanism to get current time
and date from external server in boot time. Time service is implemented by the Daytime protocol(RFC-867),
Time protocol(RFC-868), and NTP protocol(RFC-1305). You have to assign an IP address of a time server and
then, the ZyXEL device will get the date, time, and time-zone information from this server.
All contents Copyright (c) 2007 ZyXEL Communications Corporation.
Prestige 2301R/RL-P1C Support Notes
56