ZyXEL Communications P-2301R/RL-P1C Support Notes page 21

Generic and TCP/IP (and IPX)
mixing of different category rules within any filter set in Menu 21. In the following example, you will receive
an error message 'Protocol and device filter rules cannot be active together'
IPX) filter rule in a filter set that has already had one or more active Generic filter rules. You will receive the
same error if you try to activate a Generic filter rule in a filter set that has already had one or more active
TCP/IP (or IPX) filter rules.
Menu 21.1.1:
Filter #: 1,1
Filter Type= Generic Filter Rule
Active= Yes
Offset= 0
Length= 0
Mask= N/A
Value= N/A
More= No
Action Matched= Check Next Rule
Action Not Matched= Check Next Rule
Menu 21.1.2:
Filter #: 1,2
Filter Type= TCP/IP Filter Rule
Active= Yes
IP Protocol= 0
Destination: IP Addr= 0.0.0.0
filter rules are in different filter sets. The SMT will detect and prevent the
Menu 21.1.1 - Generic Filter Rule
Log= None
Menu 21.1.2 - TCP/IP Filter Rule
IP Source Route= No
IP Mask= 0.0.0.0
Port #= 0
Port # Comp= None
All contents Copyright (c) 2007 ZyXEL Communications Corporation.
Prestige 2301R/RL-P1C Support Notes
21
if you try to activate a TCP/IP (or