ZyXEL Communications P-2301R/RL-P1C Support Notes page 58

immediate-neighbor multicast routers so the multicast routers can decide if a multicast packet needs to be
forwarded. At start up, the ZyXEL device queries all directly connected networks to gather group membership.
After that, the ZyXEL device updates the information by periodic queries. The ZyXEL device implementation
of IGMP is also compatible with version 1. The multicast setting can be turned on or off on Ethernet and remote
nodes.
•
IP Multicast Setup
Enable IGMP in Prestige's LAN in menu 3.2:
DHCP= Server
Client IP Pool:
Starting Address= 192.168.1.33
Size of Client IP Pool= 32
First DNS Server= From ISP
IP Address= N/A
Second DNS Server= From ISP
IP Address= N/A
Third DNS Server= From ISP
IP Address= N/A
DHCP Server Address= N/A
Press ENTER to Confirm or ESC to Cancel:
Enable IGMP in Prestige's remote node in menu 11.3:
Menu 3.2 - TCP/IP and DHCP Ethernet Setup
All contents Copyright (c) 2007 ZyXEL Communications Corporation.
Prestige 2301R/RL-P1C Support Notes
TCP/IP Setup:
IP Address= 192.168.1.1
IP Subnet Mask= 255.255.255.0
RIP Direction= Both
Version= RIP-1
Multicast= IGMP-v2
Edit IP Alias= No
58