Type/Model Configuration Tables (6563/6564/6574) - Lenovo Aptiva Hardware Maintenance Manual

Type/Model configuration tables
(6563/6564/6574)
Notes
Some open bay models are identified as AAP
(Authorized Assembler Program) models. AAP
models are manufactured by IBM without certain
devices such as:
– Graphics
– Hard Disk Drive
– CD-ROM unit
– Memory
– Video or other option card
– Preload
AAP IBM Dealers and Business Partners install
certain devices (IBM options) in these open bay
models.
Other then AAP IBM Dealers and Business
Partners can purchase these open bay models.
The IBM HelpCenter has information, based on
system serial number, for identifying installed IBM
options in open bay AAP models.
16X Max CD-ROM drive runs at a constant
speed. This allows for eight-speed reading at the
disk hub and sixteen-speed reading at the disk
edge.
– For 24X Max CD-ROM drives, the disk hub
and disk edge speeds are 10X and 24X.
– For 32X Max CD-ROM drives, the disk hub
and disk edge speeds are 14X and 32X.
– For 40X Max CD-ROM drives, the disk hub
and disk edge speeds are 17X and 40X.
– For 48X Max CD-ROM drives, the disk hub
and disk edge speeds are 20X and 48X.
Note
These model tables are for the PC 300 models only.
For Aptiva type and 2178/2198 models, please refer to
the IBM on-line site, www.ibm.com/pc/
Table
PC 300 Type 6563/6593
PC 300 Type 6564
PC 300 Type 6574
PC 300 - 6563/6593/6564/6574 Aptiva - 2178/2198
Page
204
210
215
203