Front panel
Top Latches
To remove the front panel:
1. Remove the top cover.
2. Remove the top blank bezel and EMC shield or the
CD-ROM drive.
Note
Depending on which one is installed, the blank
bezel and EMC shield or the CD-ROM drive must
be removed in order to remove the front panel.
3. Reach inside the chassis and pull apart the two
bottom latches inside the front panel while pulling the
panel out. The two bottom latches will unlatch from
the chassis.
4. Next, pull apart the top two latches from inside the
panel while pulling the panel out.
5. To remove the front panel, pivot the bottom of the
panel out and down at the same time.
172
IBM PC 300/IntelliStation/Aptiva Vol 2 HMM
Bottom Latches