Lenovo Aptiva Hardware Maintenance Manual page 205

POST Error Code
210XXXX
Internal bus, size unknown.
210XXX1
External bus, size unknown.
Tape Drive amber LED
remains on.
Tape Drive green "in use"
LED fails to come on.
Tape automatically ejected
from drive.
SCSI ID on rotary switch
does not match SCSI ID
set in configuration.
Verify drive switches
inside cover are set to
zero.
Tape sticks/breaks in
drive.
Verify that the tapes used
meet ANSI standard X3B5.
212XX
213XX
214XX
215XXXC
215XXXD
215XXXE
215XXXU
If an external device, and
power-on LED is off, check
external voltages.
216XX
217XX
If an external device, and
power-on LED is off, check
external voltages.
218XX
Check for multi CD
tray, or juke box.
219XX
PC 300 - 6563/6593/6564/6574 Aptiva - 2178/2198
FRU/Action
1. SCSI Hard Disk Drive
2. SCSI Adapter or
System Board
3. SCSI Cable
4. SCSI ID Switch
(on some models)
1. Tape Drive
2. SCSI Cable (internal)
3. SCSI Adapter or
System Board
1. Tape Drive
2. SCSI Adapter or
System Board
3. SCSI Cable (internal)
SCSI Cable (external)
1. Tape Cassette
2. Drive
1. Rotary Switch Circuit
Board
2. Circuit Board Cable
3. Tape Drive
1. Tape Cassette
1. SCSI Printer
2. Printer Cable
1. SCSI Processor
1. WORM Drive
1. CD-ROM Drive I
CD-ROM Drive II
Enhanced CD-ROM
Drive II
Any CD-ROM Drive
2. SCSI Cable
3. SCSI Adapter or
System Board
1. Scanner
1. Rewritable Optical
Drive
2. SCSI Adapter or
System Board
3. SCSI Cable
1. Changer
1. SCSI
Communications
Device
195