Playing Tv Audio Only; Changing Channel Settings; Automatically Scanning For Channels - Insignia NS-65D260A13 User Manual

Playing TV audio only

You can turn off the picture on your TV and listen to
the program audio only.
To play TV audio only:
1 Press MENU. The on-screen menu opens.
2 Press or to highlight CHANNELS, then press
or ENTER. The Channels menu opens.
3 Press or to highlight Audio Only, then
press ENTER.
4 Press or to select On.
5 Press MENU to return to the previous menu, or
press EXIT to close the menu.
Notes
• Audio Only works only when the input source is
TV, and your TV is receiving a broadcast signal.
• To exit audio only mode, press any button.
When you exit audio only mode, the Audio
Only option is automatically reset to Off.
30

Changing channel settings

Automatically scanning for channels

When you scan for channels, your TV searches for
channels with signals and stores the channel
information in the channel list. When you press
CH
previous channel in the channel list.
If the TV signal source changes, for example you
change from an outdoor antenna to cable TV (no
box), you need to scan for channels.
To automatically scan for channels:
1 Press MENU. The on-screen menu opens.
2 Press
3 Press
then press ENTER. The Channels · Auto Channel
Search screen opens.
4 Press
Satellite Box, then press ENTER.
www.insigniaproducts.com
NS-65D260A13 Insignia 65" 1080p LED TV
or CH , your TV goes to the next or
or to highlight CHANNELS, then press
or ENTER. The Channels menu opens.
or to highlight Auto Channel Search,
or to highlight Antenna, Cable, or