Understanding The Basics; Turning Your Tv On Or Off; Selecting The Video Input Source; On-Screen Menu Overview - Insignia NS-65D260A13 User Manual

Insignia 65" 1080p LED TV

Understanding the basics

Turning your TV on or off

To turn your TV on or off:
1 Make sure that the power cord is connected to
your TV and to a power outlet.
2 Press (power) to turn on your TV. The power
indicator turns off.
3 Press (power) again to turn off your TV. Your
TV enters standby mode, and the power
indicator turns red.
Warning
When your TV is in standby mode, it is still receiving
power. To completely disconnect power, unplug the
power cord.
Note
If your TV does not receive an input signal for several
minutes, it automatically goes into standby mode.

Selecting the video input source

To select the video input source:
1 Turn on your TV, then press INPUT. The INPUT
SOURCE list opens.
2 Press or to select a video input source, then
press ENTER.
You can also press a Quick Launch Input button to
select the video input source.
• Press TV to select TV (if your TV is connected to an
antenna, cable TV (no box), or cable or satellite TV
using a coaxial cable).
• Press VIDEO to select the composite input.
• Press HDMI one or more times to select one of the
HDMI inputs.

On-screen menu overview

Picture menu (TV mode)
Audio menu (TV mode)
Channels menu (TV mode)
www.insigniaproducts.com
Notes
• Depending on the signal source selected, you
may see different options on your screen. The
following menus are shown in TV mode (except
the Photos menu).
• Menu items that are not selectable are grayed
out.
• Menus in this manual are described in TV mode,
unless otherwise indicated.
• The screens shown in this manual are for
explanation purposes and may vary from the
actual screens on your TV.
23