Connecting A Home Theater System With Multiple Devices - Insignia NS-65D260A13 User Manual

Insignia 65" 1080p LED TV
Using analog audio
To connect a home theater system using analog
audio:
1 Make sure that your TV's power cord is
unplugged and the home theater system is
turned off.
2 Connect a 3.5mm audio cable (not provided) to
the /AUDIO OUT jack on the side of your TV
and to the AUDIO IN jacks on the analog home
theater system.
Home theater system
Note
You can connect headphones, an amplifier, a home
theater system, or a sound bar to the
jack. If you want to use headphones, you need to
disconnect the amplifier, home theater system, or
sound bar.
Side of TV
3.5mm audio cable
/AUDIO OUT
www.insigniaproducts.com
Connecting a home theater system with
multiple devices
Blu-ray player/DVD player/VCR
AV receiver
Camcorder/game console
USB flash drive
Computer
The connections you make depend on the video
and audio jacks available on your devices. Refer to
the documentation that came with your devices for
connection information.
Just remember to use the best connection types
available for the best picture and sound. For
information about connection types, see
connection should I
Cable/satellite box
Antenna or cable
TV connected
directly to the
wall jack
"What
use?" on page 9.
19