Selecting The Audio Out Mode; Playing Tv Audio Only - Insignia NS-39D40SNA14 User Manual

• MTS/SAP—(Analog channels only) Selects the
audio mode. You can select:
• Mono—Select this option if there is noise
or static on weak stereo broadcasts.
• Stereo—Select this option for programs
broadcast in stereo.
• SAP—Select this option to listen to a
secondary audio program, if available.
Note
• Audio Language—(Digital channels only)
Selects an alternate audio language, if
available.
• Headphone/Audio Out—You can use the
/AUDIO OUT jack on the side of your TV to
connect headphones, an amplifier, a home
theater system, or a sound bar. When a device
is connected to the
TV speakers are muted. This option selects
where the audio is played. You can select:
• Headphone—Select this option if you
connected headphones.
• Audio Out Fixed—Select this option to
use the remote control that came with the
amplifier, home theater system, or sound
bar you connected to the
jack to control the audio.
• Audio Out Variable—Select this option to
use the remote control that came with
your TV to control the audio from the
amplifier, home theater system, or sound
bar you connected to the
jack.
This option is only available when a device is
connected to the
• Reset Audio Settings—Reset all audio
settings to factory defaults.
4 Press or to adjust the option, or press
to select a setting.
5 Press MENU to return to the previous menu, or
press EXIT to close the menu.

Selecting the audio out mode

If your TV is on when you connect a device to the
/AUDIO OUT jack on the side of your TV, a screen
opens where you select which audio out mode you
want to use.
To select the audio out mode:
1 Connect headphones, an amplifier, a home
theater system, or a sound bar to the
OUT jack on the side of your TV. The following
screen opens.
44
You can also press MTS/SAP one
or more times to select the
audio mode.
/AUDIO OUT jack, the
/AUDIO OUT
/AUDIO OUT
/AUDIO OUT jack.
/AUDIO
www.insigniaproducts.com
2 Press
you want to use, then press ENTER. You can
select:
• Headphone—Select this option if you
connected headphones.
• Audio Out Fixed—Select this option to use
the remote control that came with the
amplifier, home theater system, or sound bar
you connected to the
control the audio.
• Audio Out Variable—Select this option to
use the remote control that came with your TV
to control the audio from the amplifier, home
theater system, or sound bar you connected to
the

Playing TV audio only

You can turn off the picture on your TV and listen to
the program audio only.
To play TV audio only:
1 Press MENU. The on-screen menu opens.
2 Press
or ENTER. The CHANNELS menu opens.
3 Press
press ENTER.
4 Press
or
5 Press MENU to return to the previous menu, or
press EXIT to close the menu.
Notes
• The picture turns off in about five
• Audio Only works only when the
• To exit audio only mode, press any
NS-39D40SNA14 Insignia 39" LED TV
or to highlight the audio out mode
/AUDIO OUT jack to
/AUDIO OUT jack.
or to highlight CHANNELS, then press
or to highlight Audio Only, then
or to select On.
seconds.
input source is TV, and your TV is
receiving a broadcast signal.
button. When you exit audio only
mode, the Audio Only option is
automatically reset to Off.