Insignia NS-65D260A13 User Manual page 15

Insignia 65" 1080p LED TV
Using DVI (same as HDMI but requires a sound
connection)
Note
You must use the HDMI1/DVI jack to connect a cable
or satellite box using DVI. If you use another HDMI
jack, you will not hear sound from the TV speakers.
To connect a cable or satellite box using DVI:
1 Make sure that your TV's power cord is
unplugged, and all connected equipment is
turned off.
2 Connect the incoming cable from the cable wall
jack to the cable-in jack on the cable or satellite
box.
3 Connect an HDMI-DVI adapter (not provided) to
one end of an HDMI cable (not provided), then
connect the adapter to the DVI OUT jack on the
cable or satellite box.
4 Connect the other end of the cable to the
HDMI1(DVI) jack on the back of your TV.
HDMI cable with
HDMI-DVI adapter
5 Connect a 3.5mm audio cable (not provided) to
the PC IN AUDIO jack on the back of your TV
and to the AUDIO OUT jacks on the cable or
satellite box.
Note
When you connect the audio using the PC IN AUDIO
jack, the audio output is analog.
6 Plug your TV's power cord into a power outlet,
turn on your TV, then turn on the cable or
satellite box.
7 Go through the Setup Wizard on page 20.
Back of TV
3.5mm audio cable
Cable or satellite box
www.insigniaproducts.com
Using component video (better)
To connect a cable or satellite box using
component video:
1 Make sure that your TV's power cord is
unplugged, and all connected equipment is
turned off.
2 Connect the incoming cable from the cable wall
jack to the cable-in jack on the cable or satellite
box.
3 Connect a component video cable (not
provided) to the Y/VIDEO, P
jacks on the back of your TV and the component
video out jacks on the cable or satellite box.
Cables are often color-coded
to match color-coded jacks.
Back of TV
Cable or satellite box
4 Connect an audio cable (not provided) to the
AV IN AUDIO L/R jacks on the back of your TV
and to the audio out jacks on the cable or
satellite TV box.
Note
• The Y/VIDEO, P
connect a component device) share the
AV IN AUDIO L/R jacks with the Y/VIDEO jack
(used to connect a composite device).
• When you connect the audio using the
AV IN AUDIO L/R jacks, the audio output is
analog.
5 Plug your TV's power cord into a power outlet,
turn on your TV, then turn on the cable or
satellite box.
6 Go through the Setup Wizard on page 20.
, and P video
B R
Component
video cable
Audio cable
, and P video jacks (used to
B R
11