Smart Technologies SMART Board 480i5 User Manual page 24

C H A P T E R 3
Using your interactive whiteboard system
Setting Use
3D Invert Selects the 3D Invert setting (L-R or R-
Left-Right L).
Auto Signal Detect Enables or disables signal searching of
input connectors.
Lamp Reminder Turns the lamp replacement reminder
on or off.
Lamp Mode Adjusts lamp brightness to Standard
or Economy.
Auto Power Off Sets the length of the auto power-off
(minutes) countdown timer between 1 and 240
minutes.
Zoom Adjusts the zoom to the center of the
image in or out from 0 to 30.
Projector ID Displays the projector's unique ID
number (from 0 to 99) within your
organization's network.
14
Notes
L-R displays visual data for the left eye
first.
R-L displays visual data for the right
eye first.
Select On to have the projector
continuously switch inputs until it finds
an active video source.
Select Off to maintain signal detection
in one input.
This reminder appears 100 hours
before the recommended lamp
replacement.
Standard displays a high-quality,
bright image.
Economy increases the lamp life by
decreasing the brightness of the image.
The default is 120 minutes.
The timer begins to count down when
the projector no longer receives a video
signal. The timer finishes when the
projector enters Standby mode.
Select 0 to turn off the timer.
The default is 0.
This setting affects image adjustments
done mechanically to the boom.