When & How To By-Pass Your Water Conditioner - Culligan ESTATE 2M Use And Care Manual

When and how to bypass your Culligan
water conditioner . . .
Normally, all water except to outside lines passes through the water condi-
tioner. There are times when the water conditioner should be by-passed, using
the push-button Cul-Flo-Valv
by-pass:
1 If lines to outside faucets do not by-pass the water conditioner, and you do
not want to waste soft water on lawn sprinkling or other outside uses.
2 If you are going away on vacation and want to save salt by not having the
unit recharge while you're away.
3 If you wish to inspect and clean the valves or salt storage container.
4 If a water leak from the conditioner is evident.
PUSH-BUTTON BY-PASS
To by-pass unit, simply push the Red knob (marked "Push to By-Pass") all the
way to your left. To return to soft water service, reverse the procedure — push
the Blue knob (marked "Soft Water") all the way to your right.
by-pass, or a 3-way by-pass valve. You should
®
9