Editing Or Deleting An Existing Qos Policy - NETGEAR WNDR3300 - RangeMax Dual Band Wireless-N Router Wireless Reference Manual

NETGEAR RangeMax™ Dual Band Wireless-N Router WNDR3300 Reference Manual
3. From the Priority Category list, select MAC Address. The QoS - Priority Rules screen
changes:
Figure 5-10
4. If the device to be prioritized appears in the MAC Device List, select it. The information from
the MAC Device List will be used to populate the policy name, MAC Address, and Device
Name fields. If the device does not appear in the MAC Device List, click Refresh. If it still
does not appear, you must complete these fields manually.
5. From the Priority drop-down list, select the priority that this device's traffic should receive
relative to other applications and traffic when accessing the Internet. The options are Low,
Normal, High, and Highest.
6. Click Apply to save this rule to the QoS Policy list and return to the QoS Setup screen.
7. In the QoS Setup screen, select the Turn Internet Access QoS On check box.
8. Click Apply.

Editing or Deleting an Existing QoS Policy

To edit or delete an existing QoS policy:
1. From the main menu, under Advanced, select QoS Setup. The QoS Setup screen displays, as
shown in Figure 5-6 on page
2. Select the radio button next to the QoS policy to be edited or deleted, and do one of the
following:
Fine-Tuning Your Network
5-15.
v1.0, February 2008
5-19