NETGEAR WNDR3300 - RangeMax Dual Band Wireless-N Router Wireless Reference Manual page 117

NETGEAR RangeMax™ Dual Band Wireless-N Router WNDR3300 Reference Manual
1. Select Wireless Settings under Setup in the main menu of the WNDR3300 router.
Figure 7-1
2. For the wireless network name (SSID), use the default name, or choose a suitable descriptive
name. In the Name (SSID) field, you can enter a value of up to 32 alphanumeric characters.
The default SSID is NETGEAR.
Note: The SSID is case-sensitive; NETGEAR is not the same as nETgear. Also, the
SSID of any wireless access adapters must match the SSID you configure in
the RangeMax Dual Band Wireless-N Router WNDR3300. If they do not
match, you will not get a wireless connection to the WNDR3300 router.
3. Select the region in which the wireless interface will operate.
4. Set the channel. The default channel is Auto.
Troubleshooting
v1.0, January 2008
7-11