Qos For A Mac Address - NETGEAR WNDR3300 - RangeMax Dual Band Wireless-N Router Wireless Reference Manual

NETGEAR RangeMax™ Dual Band Wireless-N Router WNDR3300 Reference Manual
3. From the Priority Category list, select Ethernet LAN Port. The QoS - Priority Rules screen
changes:
Figure 5-9
4. From the LAN port list, select the LAN port that will have a QoS policy.
5. From the Priority drop-down list, select the priority that this port's traffic should receive
relative to other applications and traffic when accessing the Internet. The options are Low,
Normal, High, and Highest.
6. Click Apply to save this rule to the QoS Policy list and return to the QoS Setup screen.
7. In the QoS Setup screen, select the Turn Internet Access QoS On check box.
8. Click Apply.

QoS for a MAC Address

To create a QoS policy for traffic from a specific MAC address, follow these steps:
1. From the main menu, under Advanced, select QoS Setup. The QoS Setup screen displays, as
shown in Figure 5-6 on page
2. Click Add Priority Rule.
5-18
5-15.
v1.0, February 2008
Fine-Tuning Your Network