NETGEAR WNDR3300 - RangeMax Dual Band Wireless-N Router Wireless Reference Manual page 67

NETGEAR RangeMax™ Dual Band Wireless-N Router WNDR3300 Reference Manual
5. Type the destination IP address of the final destination.
6. Type the IP subnet mask for this destination.
If the destination is a single host, type 255.255.255.255.
7. Type the gateway IP address, which must be a router on the same LAN segment as the
WNDR3300 router.
8. Type a number between 1 and 15 as the metric value.
This represents the number of routers between your network and the destination. Usually, a
setting of 2 or 3 works, but if this is a direct connection, set it to 1.
9. Click Apply to have the static route entered into the table.
Customizing Your Network Settings
v1.0, February 2008
4-11